Skip to content
Free Shipping for USA customers over $50.00
Free Shipping for USA customers over $50.00
ESAB Rebel EMP 205IC AC/DC Multiprocess Mig/Stick/Tig Welder package - 0558102553

ESAB Rebel EMP 205IC AC/DC Multiprocess Mig/Stick/Tig Welder package - 0558102553

by Esab
Save $500.00 Save $500.00
$4,599.00
$4,599.00 - $4,599.00
$4,599.00
$4,099.00
$4,099.00 - $4,099.00
$4,099.00
SKU 0558102553

⚠️WARNING: Cancer and Reproductive Harm

www.p65warnings.ca.gov

ESAB Rebel EMP 205IC AC/DC Multiprocess Mig/Stick/Tig Welder package

The Rebel EMP 205IC AC/DC Multiprocess machine does it all! YES it TIG welds Aluminum! The Rebel 205 is the total package and gives you the best in class all process performance with fully loaded MIG, Flux Cored, Stick, DC TIG and now AC TIG!

FULL-FUNCTION TIG FEATURES.
Rebel EMP 205ic AC/DC is for welders who want full control over the arc for unmatched performance. This means you get LiftTIG and high frequency (HF) start, AC wave balance (60%–90%), AC frequency (25–400 Hz), pulsed (DC) (1–500 pps), and amplitude offset – the next level in AC TIG adjustment.

MIG. FLUX-CORED. STICK. DC TIG. AC TIG. OH YEAH.
Rebel EMP 205ic AC/DC delivers best-in-class performance with no compromise in any process. It runs MIG, Stick, and TIG like it was born to. You can even use 6010 electrodes on a 120 V input line. Dedicated process machines are now a thing of the past.

CRAZY SMART TECHNOLOGY.
Whether you've been welding for two years or 20, Rebel can make your job easier with ESAB’s groundbreaking feature: sMIG (smartMIG). For rookies, there's basic mode, which makes setup simple. And for veterans, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds will truly blow your mind.

THE TOTAL PACKAGE.
It takes more than a machine to get up and welding. So when you buy a Rebel, you can expect all the equipment you need to get going – right out of the box – from some of the best names in the industry.

Tweco® Fusion 180 A MIG gun with 10 ft. (3 m) cable
ESAB Heliarc® HW17 TIG torch outfit with accessory kit and 12.5 ft. (3.8 m) cable
Spare MIG gun parts kit, including contact tips and drive rolls
Tweco 200 A electrode holder with 13 ft. (4 m) cable
Four general purpose 6013 Stick electrodes
ESAB 70S-6 .030, 4 in., 2 lb. sample spool
Tweco ground clamp with leads
Victor® argon flowgauge regulator with 12.5 ft. (3.8 m) gas hose
120 V and 230 V adapter plugs

    ESAB Rebel EMP 205IC AC/DC Multiprocess Mig/Stick/Tig Welder package

    The Rebel EMP 205IC AC/DC Multiprocess machine does it all! YES it TIG welds Aluminum! The Rebel 205 is the total package and gives you the best in class all process performance with fully loaded MIG, Flux Cored, Stick, DC TIG and now AC TIG!

    FULL-FUNCTION TIG FEATURES.
    Rebel EMP 205ic AC/DC is for welders who want full control over the arc for unmatched performance. This means you get LiftTIG and high frequency (HF) start, AC wave balance (60%–90%), AC frequency (25–400 Hz), pulsed (DC) (1–500 pps), and amplitude offset – the next level in AC TIG adjustment.

    MIG. FLUX-CORED. STICK. DC TIG. AC TIG. OH YEAH.
    Rebel EMP 205ic AC/DC delivers best-in-class performance with no compromise in any process. It runs MIG, Stick, and TIG like it was born to. You can even use 6010 electrodes on a 120 V input line. Dedicated process machines are now a thing of the past.

    CRAZY SMART TECHNOLOGY.
    Whether you've been welding for two years or 20, Rebel can make your job easier with ESAB’s groundbreaking feature: sMIG (smartMIG). For rookies, there's basic mode, which makes setup simple. And for veterans, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds will truly blow your mind.

    THE TOTAL PACKAGE.
    It takes more than a machine to get up and welding. So when you buy a Rebel, you can expect all the equipment you need to get going – right out of the box – from some of the best names in the industry.

    Tweco® Fusion 180 A MIG gun with 10 ft. (3 m) cable
    ESAB Heliarc® HW17 TIG torch outfit with accessory kit and 12.5 ft. (3.8 m) cable
    Spare MIG gun parts kit, including contact tips and drive rolls
    Tweco 200 A electrode holder with 13 ft. (4 m) cable
    Four general purpose 6013 Stick electrodes
    ESAB 70S-6 .030, 4 in., 2 lb. sample spool
    Tweco ground clamp with leads
    Victor® argon flowgauge regulator with 12.5 ft. (3.8 m) gas hose
    120 V and 230 V adapter plugs

      Customer Reviews

      Based on 102 reviews
      91%
      (93)
      9%
      (9)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      100.0
      100.0
      T
      Tomas Padilla
      Powerful welder

      First time welder, good little machine. Works very well, I found that increasing the wire speed to 15 on the settings is a definite improvement on the quality of the weld. Stacking dimes now. The more I use this the more I like it.

      Z
      Zane Rivera
      I like it.

      I was doubtful about how this welder would perform at first, but I don't have doubts about this machine now. Instructions for setup were existent. Great welder and easy to use. I like it.

      A
      Adrian Solano
      Nice welder

      Like the way it performs. Amazing machine at any price. Easy to use, quality welds. Highly recommend.

      C
      Clara Morrison
      Great value for a multiprocess machine

      Best value for a multiprocess welder! It offers capabilities that usually come at a much higher price point. You get a lot of features and quality for your investment. Very happy!

      M
      Mabel Rhodes
      Adjustable features for precise control

      Impressive range of adjustments for tig welding! Ac wave balance and frequency settings allow for fine-tuning based on my needs. I can achieve precise results with ease.

      123